How to Replace a Mazda Key
Mazda is a name that is renowned for its innovative and intuitive technology. Some of these systems improve safety or performance, while others help make driving your Mazda around East Stroudsburg, Easton, and Brodheadsville simpler.
The key fob is an excellent example of the latter. This handy device allows you to lock, unlock and begin your Mazda by pressing the button. The battery needs to be replaced every so often.
Lost Keys
Keys that are stolen or lost could be a major issue. It is relatively simple to replace the Mazda Key for older models using regular keys made of metal. However, the latest models require computer chips that are programmable which can only be manufactured by a locksmith or dealer.
You will need to start by obtaining the VIN number for your vehicle. This information is available on the dashboard of the car, on your insurance card or in the vehicle's documents. Note this information down to give to the locksmith or dealership.
You will require a spare key that works. Place the key in the slot and turn the ignition to ON. After about five seconds, you can remove the key, and switch the ignition off. Repeat the procedure with the second working key. Once both keys are in the car's computer chip is linked to the new key.
If you have lost your keys and don't have a backup plan, you will need to have the vehicle towed to a dealer. Then, you'll have to show proof of ownership, and pay for the replacement key. You might need to wait a few days until the dealer is able to order and install a new key to your vehicle. If you're able, ask a locksmith make a replacement key instead of a dealer for a lower cost and less hassle.
Repair of the ignition Cylinder
The ignition cylinder is part of your Mazda that allows you to start the car by using a key. If your car isn't turning or you can't insert the key in the switch, you may need to replace the ignition cylinder.
The ignition cylinders fail more frequently than the keys that last longer. You don't have to follow any specific maintenance plan, however, keeping your keys clean will help it last longer.
To replace the ignition cylinder, first you need to remove the trim pieces and covers that could be in the way. Depending on the model it could mean taking off the cover for the steering wheel or removing the wiper and accessory switches. Then make use of a screwdriver, or socket wrench to press a release tab on the cylinder. This releases the cylinder from the switch and allows it to slide out of the housing.
When the cylinder is taken out, replace it by connecting it to the wires, securing two screws on top and replacing the switch cover. Reconnect the battery and ensure that the new cylinder can insert or remove keys. Repeat this process several times, and then reconnect the battery and try to start the vehicle to make sure everything is functioning correctly.
Remote Control Replacement
When your Mazda key remote isn't working, you'll require a professional to get it back up and running. While this isn't as common as a problem with the ignition cylinder, it does happen, and it can leave you in some situations. Locksmiths can repair the remote in your car and handle all the programming that comes with it.
The only thing you'll need to supply to locksmiths to allow them to be able to do this is the model and year of your Mazda vehicle. This will enable them to gather the correct equipment and know whether they'll need to perform any additional programming of keys for your specific model of Mazda.
If your key fob won't turn on, it may just have a battery issue. The best thing to do in this situation is to reset the receiver, as this will often bring back functionality. If this fails, you will need to replace the batteries. To do this, you'll need to remove the key and then use a flathead screwdriver wrapped in tape to push the case open on one side. After you've done that, put a battery into the keyfob. Make sure it's a compatible battery and then close the case. replace mazda key fob in your Mazda will have to be programmed to recognize the new key.
Transponder Chip Replacement
If you have an Mazda key fob or smart key, there is a good chance that your car has a transponder chip inside. This tiny piece of technology, which is basically a micro-motherboard, sends an indication to the immobilizer in your car when placed in the ignition.
Keys are great for security since they block others from getting your car started. They do this by ensuring that only you are able to start it. This is why you have to be vigilant to make sure that your key does not disappear or be stolen.
A professional locksmith can replace the chip that is transponder. To accomplish this, you'll need to remove the cover from the key fob. Usually it's a thin piece of plastic which can be removed using the help of pliers or a screwdriver. Then, you will need to remove the chip. It should appear as a tiny black square or a transparent tube. After you've done this, place the chip onto an adhesive tape and connect it to the ignition lock.
A locksmith who is experienced will be able do this in a flash, and will help you get back on the road in no time. If you're experiencing any issues with your Mazda key, contact a trusted mobile locksmith right away.